•
The temperature of the object on which the SOS-Gateway
is mounted must be within the operating temperature of the
SOS-Gateway. When using the version with built-in mobile
radio module (art. no. 0800201), a mobile radio network of
the selected network operator with GPRS (2G) or UMTS
(3G) service feature for the data card used and the selected
network operator must be available at the installation site.
The selection of the network provider is made in the course
of planning and commissioning by the customer. The avai-
lability of the selected network must also be checked for
each SOS-Gateway by the installers.
A
B
Ceiling mounting
is
preferable
to wall mounting. However, wall
mounting is also possible.
>1m
Installation as far away as possible
from metal objects.
At least 1m distance to metallic construction elements (e.g.
steel girders, reinforced concrete) and other facilities in the
building such as loudspeakers, WLAN access points, DECT
base stations, fire detection & extinguishing systems and/or
cable trays.
Open on all sides, do not install in
corners
Install with clear line of sight
0-2.5 m
2.5-5 m
> 5 m
To prevent tampering, install as far
as possible out of reach of persons;
up to a maximum height of 5m.
5.2 Assembly
For mounting with pan-head screws (max. 7.5mm head dia-
meter) a suitable lightly adhesive drilling template is included
to mark the required holes. Use screws and dowels suitable
for the substrate.
Alternatively, depending on the surface, the SOS-Gateway
can be glued on. For this purpose, the adhesive pad with
pull-off tab Art. No. 0390217 from Swissphone based on Tesa
70465 can be used. This pad should be attached diagonally
to the bottom of the gateway. For later removal the tab should
be on the outside.
The surface condition and the following in case of a later re-
moval of the SOS-Gateway must be observed.
6 Mounting mobile phone module for
0800201
The 0800201 variant is also supplied with a mobile phone
module and an additional housing. This housing is mounted
as follows:
Insert the module into the lower USB socket:
Pull the supply cable through the opening on the additional
housing.
Insert the additional housing in the lower opening, the
supply cable should be in the groove.
Swissphone Wireless AG
Fälmisstrasse 21
CH-8833 Samstagern
Tel.:
+41 44 786 77 70
Fax:
+41 44 786 77 71
E-Mail: [email protected]
E
N 0
8/
20
20 0
34
32
23 V
2 W
E
C
In
fo
rm
at
io
n i
s p
ro
vi
d
ed s
ub
je
ct t
o t
ec
hn
ic
al m
od
ifi
ca
tio
ns
, e
rr
or
s a
nd t
yp
in
g e
rr
or
s.
Art. Nr. 0800201 / 0800202
