swissonic SA-130 Owner'S Manual Download Page 11

Page 11

technIcal specIfIcatIons

Input sensitivity for full output at max. gain

Balanced microphone channels   

 

-50dB to -6dB ± 3dB

Unbalanced line channels  

 

 

-6dB ± 3dB

Unbalanced Link-OUT 

 

 

 

 0dB ± 3dB

Frequency Response

at 1 watt from speaker out tap.100Hz~10kHz 

± 1.5dB

Graphic Equalizer

Treble and bass range 

 

 

 

± 10dB

Signal to Noise Ratio at rated power output 

better than 65dB

Output power at THD 0.5% 

 

 

130 Watts

THD at 1kHz rated power   

 

 

Less than 0.5%

Phantom Power 

 

 

 

 

22VDC

Output Voltage and Impedance

    4 Ω 

 

 

 

 

 

22.8 V

    8 Ω 

 

 

 

 

 

32.3 V

  16 Ω 

 

 

 

 

 

45.6 V

  70 V 

 

 

 

 

 

37.7 V

100 V 

 

 

 

 

 

76.9 V

Construction

Cooling 

 

 

 

 

 

DC24V

Dimensions (WxHxD) 

 

 

 

420 x 88 x 320mm

Net weight   

 

 

 

 

10.2 kg

Operating Temperature/Humidity   

 

0° ~ 40° C / 95% max. (no condensing!)

Our products are subject to a process of continual further development. Therefore modifications to 

the technical features remain subject to change without further notice.

dIsposal

Never throw the device into the regular household waste at the end of its useful life. This 

product is subject to the European Directive 2002/96/EC.

Dispose of the device through an approved disposal centre or at your community waste facility.

• 

Observe the current existing regulations. In case of doubt contact your disposal facility.

• 

The packaging is certified via a dual system. Take all packaging materials to an environmentally 

• 

friendly disposal facility in compliance with the local regulations.

Summary of Contents for SA-130













Reviews: