swissonic Headamp 4, User Manual

Page: 23 / 36

1 [dB]
Level display for the sum signal
The LED
[CLIP] (red) indicates overload (clipping). In this case the level of the input signal is too high.
2, 3 [MAIN IN1] , [MAIN IN2]
Volume control for the signals at the inputs [MAIN IN1] and [MAIN IN2]
4 [dB]
Level display for each headphones channel
The LED
[CLIP] (red) indicates overload (clipping). In this case the level of the input signal is too high.
5 [STEREO / MONO]
Pushbutton for toggling between mono mode (pressed) and stereo mode (not pressed)
6 [IN1 / IN2]
Pushbutton for selecting an input signal for each headphones output: [MAIN IN1] (not pressed), [MAIN IN2] (pressed)
Connections and controls
Headamp 4, Headamp 8
23