92
Using with a PABX
Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / pabx.fm / 13.10.2003
Auto keypad
This setting automatically changes the signalling to keypad while dialling after
*
or
#
are
entered. This automatic changeover is required for commands made to the telephone
exchange or PABX.
Dial * and #
After activating
Dial * and #
the characters
*
and
#
are sent as commands to the
telephone exchange or PABX while dialling.
Independent of the above setting options, it is automatically switched over to tone
dialling (DTMF)
after dialling
or during the call e.g., to remotely control an answering
machine.
Activating/deactivating the keypad during a call
In addition to the ongoing settings described above, you can also switch over
temporarily to the keypad.
The setting is only applicable to the current external call and is automatically
deactivated after the call is ended.
v
Open the menu.
s
Base Settings
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN, if needed (page 61).
s
System settings
Select the menu item and confirm.
s
Spec. function
Select the menu item and confirm.
s
Dial properties
Select the menu item and confirm.
s
Standard dial
Select and confirm the desired setting, e.g.,
Standard dial
(
‰
= on).
OK
OK
OK
OK
OK
OK
OK
v
Open the menu.
either ...
Activate the keypad:
s
Keypad on?
Select the menu item and confirm.
~
Enter the keypad code.
or ...
Deactivate the keypad:
s
Keypad off?
Select the menu item and confirm.
OK
OK
Summary of Contents for Top S324 ISDN
Page 1: ...Gigaset S100 SWZ dt A31008 S100 F102 1 2X19 cover_0 fm 13 10 2003 Top S324ISDN User Manual...
Page 2: ...2 Gigaset S100 SWZ dt A31008 S100 F102 1 2X19 cover_0 fm 13 10 2003...
Page 124: ...122 Index Gigaset SX100isdn englisch A31008 X150 B102 1 7619 SX_150isdnSIX fm 13 10 2003...
Page 125: ...123 Index Gigaset SX100isdn englisch A31008 X150 B102 1 7619 SX_150isdnSIX fm 13 10 2003...
