75
Setting the system
Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / settings_bs.fm / 13.10.2003
Setting up an internal group call group
You can make a group call from any handset to all other registered internal party
(page 20).
In the basic settings, all registered parties of device type "telephone" or "Neutral" are set
up in the group call group.
Setting up ring delay
Ring delay can be used to individually set up a party per incoming MSN to ring later.
During this ring delay time, the handset can take the call using the function "
Accept?
"
without hearing a ring. The ring delay time is given in rings. There are 5 seconds
between rings.
The factory default setting is 0 rings (= not activated).
For each programmed MSN, at least one party must be able to be called immediately.
Therefore, a party set up for ring delay will be called immediately if he is the only one
on this incoming MSN, or no one else can be reached on this incoming MSN.
v
Open the menu.
s
Base Settings
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN, if needed (page 61).
s
Setup user
Select the menu item and confirm.
s
Setup device
Confirm.
s
Int.11
Select the internal number, e.g.,
Int.11
.
v
Open the submenu.
s
Hunt group
Select the menu item and confirm (
‰
= activated).
OK
OK
OK
OK
OK
OK
Summary of Contents for Top S324 ISDN
Page 1: ...Gigaset S100 SWZ dt A31008 S100 F102 1 2X19 cover_0 fm 13 10 2003 Top S324ISDN User Manual...
Page 2: ...2 Gigaset S100 SWZ dt A31008 S100 F102 1 2X19 cover_0 fm 13 10 2003...
Page 124: ...122 Index Gigaset SX100isdn englisch A31008 X150 B102 1 7619 SX_150isdnSIX fm 13 10 2003...
Page 125: ...123 Index Gigaset SX100isdn englisch A31008 X150 B102 1 7619 SX_150isdnSIX fm 13 10 2003...