13
20402769en_ba_a0
Setting up the telephone
Note
You can replace the handset in the charging/base station after every call.
Charging is electronically controlled to ensure optimal charging of batteries in
different charge states. Avoid removing the batteries from the handset for no
good reason, since this affects the optimum charging cycle.
Because your telephone is fitted with a low-radiation mechanism, the anten-
na automatically switches off in standby mode and cannot therefore emit any
radiation. Your telephone is delivered with this function switched off.
You can telephone for up to 17 hours with fully charged batteries.
The handset has a standby time of 170 hours.
If the battery charge status has reached its lower limit, the battery symbol
(
) flashes in the display and a warning signal is heard. You have 10 minu-
tes of talk time left.
Installation assistant
An installation assistant simplifies things for you by guiding you step by step through the
setup procedure for your telephone.
Follow the displayed instructions and enter the preferred language, all MSN numbers
along with user name, as well as time and date.
Note
• The installation assistant will re-appear following a reset of the telephone
(reset to default settings).
• You can also enter the preferred language, MSNs, time and date in the
corresponding menus.
