12
Using a handset as a room monitor
Gigaset S45 / SWZ PTT-en / Internet / start_guide_time.fm / 02.06.2006
§Silence§
Press the display key to stop
the reminder call.
Last number redial list
The last number redial list contains the ten
numbers last dialled with the handset
(max. 32 numbers). If one of the numbers
is in the directory, then the corresponding
name will be displayed.
Manual last number redial
c
Press the key
briefly
.
s
Select entry.
c
Press the talk key again. The
number is dialled.
When a name is displayed, you can display
the corresponding phone number by
pressing the display key
§View§
.
Managing entries in the last number
redial list
c
Press the key
briefly
.
s
Select entry.
Options
Open the menu.
The following functions can be selected
with
q
:
Display Number
(as in the directory,
Copy to Directory
Copy an entry to the directory
Delete Entry
(as in the directory, page 11)
Delete List
(as in the directory, page 11)
Opening lists with the message
key
An advisory tone sounds as soon as a
new
entry
appears on a list. The
f
key
flashes (it goes off when the key is
pressed). In idle status, the displays shows
an icon for the new message.
If you press the
f
key, you access the
lists which contain new messages.
Using a handset as a room
monitor
If the room monitor is activated, a previ-
ously stored destination number is called
as soon as a set noise level is reached. You
can store an internal or external number
in your handset as the destination
number.
The room monitor call to an external
number stops after approx. 90 seconds.
The room monitor call to an internal
number (handset) stops after approx.
3 minutes (depending on the base sta-
tion). While the room monitor is activated,
all keys are locked except the end call key.
The handset's speaker is muted.
When the room monitor is activated,
incoming calls to the handset are indi-
cated
without a ringtone
and are only
shown on the screen. The display and key-
pad are not illuminated and advisory
tones are also turned off.
If you accept an incoming call, the room
monitor mode is suspended for the dura-
tion of the call, but the function
remains
activated.
If you switch off the handset, the room
monitor mode is deactivated. You must
reactivate the function after switching on
the handset again.
