18
Aton CL118 - A540 / en / A31008-M2601-F151-1-2X19 / contacts.fm / 09.12.2014
A-K
lasse
_La
you
t_
Ne
u, V
e
rsi
on
4
, 28.05
.2
014
Additional functions
Additional functions
Alarm clock
An alarm call is signalled on the display and with the selected volume and melody (
page 23) for a maxi-
mum of 60 seconds. During a call, the alarm is only indicated by a short tone.
Activating the alarm clock
¤
Menu
¤
Alarm Clock
¤
OK
¤
Activation
¤
OK
(
³
= activated)
¤
. . .
select the wake-up time in hours
and minutes with
~
¤
OK
(
μ
Saved
)
When the alarm clock is activated, the icon
ë
and the wake-up time is displayed in idle display.
Deactivating the alarm clock
¤
Menu
¤
Alarm Clock
¤
OK
¤
Activation
¤
OK
(
´
= deactivated)
Setting the wake-up time
¤
Menu
¤
Alarm Clock
¤
OK
¤
q
Wake up time
¤
OK
¤
Time:
¤
. . .
enter the wake-up time in hours
and minutes with
~
¤
OK
(
μ
Saved
)
Deactivating alarm/snooze mode
ECO DECT (Ecomode plus)
The device range is set to maximum as default. This guarantees optimum wireless management. The handset
will not function in idle status, as it is not transmitting (
No Radiation
). Only the base will maintain contact with
the handset via a low wireless signal. During a call, the transmission power automatically adapts to the
distance between the base and handset. The smaller the distance to the base, the lower the radiation.
To reduce the radiation further:
Reducing radiation by up to 80%
¤
Menu
¤
q
Settings
¤
OK
¤
q
System
¤
OK
¤
q
ECO DECT
¤
OK
¤
q
Max. Range
¤
OK
(
´
= deactivated)
h
Date and time are set (
h
An alarm call sounds.
•
Deactivate until the next alarm call:
¤
Press
Off
•
Snooze mode:
¤
Press
Snooze
or press any key
. . .
the alarm call will be
deactivated and repeated 5 minutes later
i
•
If no key is pressed, the alarm call deactivates itself after 60 seconds and is repeated 5 minutes later.
•
After the second repetition, the alarm call is deactivated for 24 hours.
i
•
The range is also reduced with this setting.
•
A repeater to increase the range cannot be used.
