20
Using the network mailbox (Combox)
Aton CL100 - Gigaset C450 / SWZ-PTT en / Internet / T-NetBox_SAG-registration.fm / 19.6.06
Using the network mailbox
(Combox)
The network mailbox is your network provider's
answering machine. You cannot use the net-
work mailbox unless you have
requested
it
from your network provider.
Configuring the network mailbox
for fast access
With fast access, you can dial the network mail-
box directly.
The network mailbox is preconfigured for fast
access. You only need to enter the number of
the network mailbox.
Configuring the network mailbox for fast
access and entering the network mailbox
number
§Menu§
¢
Voice Mail
¢
Set Key 1
Network Mailbox
Select and press
§OK§
(
‰
= on).
~
Enter the network mailbox
number and press
§OK§
.
The entry is stored.
a
Press
and
hold
(idle status).
This setting is now valid for all registered hand-
sets.
Calling the network mailbox
1
Press and
hold
. You are connected
straight to the network mailbox.
d
Press handsfree key
d
if required.
You hear the network mailbox
announcement.
Viewing the network mailbox
message
If a message arrives for you, you receive a call
from the network mailbox. If you have
requested Calling Line Identification, the dis-
play shows the network mailbox number. If you
accept the call, the new messages are played
back. If you do not accept the call, the network
mailbox number will be saved in the missed
calls list and the message key flashes (page 14).
Using several handsets
Registering handsets
You can register up to four handsets on your
base station.
Automatic registration Aton CL100 handset to
Aton CL100 base station, see page 5.
Manual registration Aton CL100 handset
to Aton CL100 base station
You must activate manual registration of the
handset at both the handset and the base sta-
tion.
After it has registered, the handset returns to
idle status. If several handsets are registered to
the base, the internal number is shown in the
display after registration, e.g.
INT 2
.
The registration process is cancelled after
60 seconds. If the handset has not registered
within this time, repeat the process.
On the handset
Menu§
¢
Settings
¢
Handset
¢
Register
Handset
~
Enter the system PIN of the base
station (the default is 0000) and
press
§OK§
.
Base
is flashing in the
display.
On the base station
÷
Press and hold the registration/
paging key on the base station
(page 1) (min. 1 sec.).
Registering other handsets
You can register other Aton CL100 handsets
and handsets for other devices with GAP func-
tionality as follows.
On the handset
¤
Start to register the handset as described in
its user guide.
On the base station
÷
Press and hold the registration/
paging key on the base station
(page 1) (min. 1 sec.).
