Swiss INDIGO 1200, Instruction Manual, Page: 5 / 11

SAFETY INSTRUCTIONS
1. Please read this manual carefully before using the machine and file away safely for future use.
2. Before switching on, make sure the dust chamber is installed properly.
3. Make sure the power supply is 220-240V~ 50/60Hz.
4. Do not vacuum the following: Liquids, Ash, Powder!
5. Do not vacuum burning material or hot ashes.
6. Do not use the machine without the main top filter properly installed.
7. Please replace the dust chamber (clear canister) and or HEPA filter immediately if it is cracked or damaged.
8. Do not store or use the machine close to high temperature areas.
9. If t h e r e i s a n abnormal noise, smell, smoke or any other failure or breakage during u s e a g e ,
please turn off the switch and unplug it. Then contact your service centre or retailer.
10. If the power supply cord is damaged, it must be replaced by the manufactures agent or service agent or
a similarly qualified person in order to avoid an electric shock.
ASSEMBLY BEFORE USE
Fig.1 shows the connection of the hose into the vacuum cleaner:
Put the hose connector in front of the vacuum cleaner . Press the release button while inserting the hose.
If you want to disassemble it, push the release button while pulling the hose connector out.
Fig.2 shows the connection of the hose and the telescopic metal tube:
Hold the flexible connector of the hose and insert into the tube.
Fig.3 shows the connection of the tube and the floor-brush tool:
Put the metal tube into the hole of the brush and rotate it to fasten.
Fig.4 shows how to check the winding of the power cord.
You can pull the power cord out until you see the Yellow marker on the cord.
Make sure you never pull the cord out past the red marker .
Fig.5 shows the power button
Put the plug into the wall-socket, push the power button on to start the vacuum cleaner.
Fig.1 Fig.2