Swiss Timing OSB 14 Series, User Manual

Page: 11 / 21

Swimming Starting Block / OSB 14
Version 1.4 3454.519.02 Page 7
4 CONTROL OF THE STARTING BLOCK
4.1 Control without application of pressure
Connect the buzzer (7) to the connection cable (6).
If there is no pressure on the platform, the buzzer (7) remains silent.
However if the buzzer (7) emits a sound, proceed as described in paragraph
4.5.
4.2 Pressure sensitivity control
Press with the dynamometer (8) against the middle of the platform (2).
Read on the dynamometer (8) the necessary pressure to activate the buzzer (7).
If the sensitivity is out of the range between 13kg and 18kg, see paragraph
4.5.3.
4.3 Connection to the timing system
If the results are ok in points 4.1 and 4.2 , connect the connection cable (6) to the timing system
.
Figure 5 - Maintenance