— 2 —
WALL-HUNG TOILET
INSTALLATION INSTRUCTIONS
3. Determine Pipe Size
· Apply lubricant on rubber washers of straight
tube and connecting pipe, then insert into holes.
· Draw lines on pipes as pictured below.
4. Cut Pipes
· Using the marked lines, cut the straight tube and
connecting pipe as instructed below.
· After cutting, be sure to chamfer cut edges.
Straight
tube
Connecting
pipe
+ 3mm
+ 3mm
+ 5mm
+ 5mm
2. Dry Fit Flange and Inlet Pipe
·
Fully insert straight tube into cistern flushing outlet
then connect pipe into discharge outlet.
·
Draw lines to mark the finished wall location on each
pipe as pictured below.
1. Install Tank
·
Before toilet bowl installation, a wood frame and
commercial or residential tank system is required.
·
Install according to manufactuer’s instructions.
