1. Read the complete instruction manual before beginning installation.
2. Confirm that your model will fit in intended location and plumbing fixtures are located
where legally required before beginning installation.
3. Not all drawings on this manual are drawn to scale. Please refer to the model chart.
4. Two people are recommended to install and move this product.
5. Product is FRAGILE! To avoid breakage and possible injury handle with care and avoid
over tightening bolts and nuts.
6. Fill valve has been factory-tightened to design specifications. If re-tightening required,
use a wrench a tighten one turn past finger tight.
7. Make sure the supply pressure is a minimum of 35 psi (2.5kg/cm³), the toilet will not
function properly without minimum water pressure.
The step-by-step guidelines in the installation instructions are a general reference for installing a Swiss Madison Two-Piece Toilet.
Should there be any discrepancies, Swiss Madison cannot be held liable.
It is recommended to install all Swiss Madison products by hiring a licensed professional
TWO-PIECE TOILET
ROUGH DIMENSIONS
— 3 —
SUGGESTED TOOLS AND MATERIALS
· Two-Piece Toilet
· Wax Ring /
Gasket
· Installation
Bolts
· Cover Caps
· P-Trap
Outlet Pipe
· S-Trap Adapter (for floor
outlet installation)
Safety
Glasses
Wrench
Level
Putty Knife
Tape
Measure
Screwdriver
Hacksaw
Flexible Supply
Tube
PARTS LIST
NOTE
: Specialized tools may be necessary to install a Swiss Madison Two-Piece Toilet, plumbing not included.
NOTE
: All measurements are nominal.
