WALL-HUNG TOILET
INSTALLATION INSTRUCTIONS
TOILET SEAT INSTALLATION
— 4 —
1. Disassemble
·
Disassemble the cover cap and the hinge.
2. Construct Hinges
·
Insert screw and nut into the hole on the hinge.
·
Attach blind hole screw fixing to the bottom of screw.
3. Attach Hinges
·
Insert hinges with blind hole screw fixings attached
into holes on toilet bowl.
·
Lightly tighten hinges with a screwdriver too allow
for later adjustment.
Pull
4. Adjust and Cover Hinges
·
Be sure the hinge is all the way forward for proper
seat fitting.
·
Place the covers onto the hinges.
or
Incorrect:
Correct:
