Reduce the risk of fire by removing grass, leaves, and other debris that may have accumulated on the
machine. Allow the machine time to cool before cleaning or putting it in storage.
Wash mower periodically. Clean above and below deck.
Keep all electrical connections clean and tight.
Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary.
Replace belts if they begin to slip from wear. SEE SPECIFICATION for belt part numbers and
SERVICE section of this manual for instructions on how to replace the belt.
CUSTOMER RESPONSIBILITIES/SPECIFICATIONS
V-Belts
Engine
REFER TO YOUR ENGINE OWNERS MANUAL
Overall Unit Care
Driving and Transport on Public Roads
Check applicable road traffic regulations before driving and transporting on public roads.
If the machine is transported, you should always use approved fastening equipment and ensure that the
machine is well anchored.
The cutting deck should also be lowered to the lowest position and the parking brake engaged.
3 Mulching Blade System
BLADES
FRONT: 4.10x3.5-5 5/8 Bearing
REAR: 18 X 9.5 X 8
TIRE SIZE
27 + - 3 ft. lbs
HYDRO Bolt Torque
Pivoting
FRONT AXLE
Spring Assisted
DECK LIFT
15” Back w/ Arm Rest
6” Adjustable Slide
SEAT
Commercial Grade Eaton Hydrostatic
TRANSMISSION
Spring Assisted
PARKING BRAKE
1.5” – 5”
CUTTING HEIGHT
66”
DECK WIDTH
LENGTH: 70”
WIDTH: 66 ¼” “
Including Deck
WEIGHT: 600 lbs
UNIT MEASUREMENTS
35 ft. lbs
BLADE BOLT TORQUE
12V / Heavy Duty 300 CCA
Type U1L
BATTERY
FRONT: 50 psi Max
REAR: 22 psi Max
TIRE PRESSURE
0 – 6 mph
GROUND SPEED
SEE ENGINE MANUAL
SPARK PLUG
SEE ENGINE MANUAL
OIL TYPE (SPI-SF-SJ):
DUAL 4.0 GAL TANKS
UNLEADED REGULAR
GASOLINE CAPACITY
AND TYPE
12
12
SPECIFICATIONS
IMPORTANT: This engine is not equipped with a spark
arrester muffler. It is a violation of California Public
Resource Code Section 4442 to use or operate the engine
on any forest-covered, brush-covered, or grass-covered
land. Other states or federal areas may have similar laws.