background image

LIMITED WARRANTY 

 

The manufacturer’s warranty to the original consumer purchaser is:  This product is free from 
defects in materials and workmanship for a period of one (1) year from the date of purchase by 
the original consumer purchaser.  We will repair or replace, at our discretion, parts found to be 
defective due to materials or workmanship.  This warranty is subject to the following limitations 
and exclusions: 
 
1) Engine Warranty 

All engines utilized on our products have a separate warranty 
extended to them by the individual engine manufacturer.  Any 
engine service difficulty is the responsibility of the engine 
manufacturer and in no way is Swisher Mower Co., Inc. or its 
agents responsible for the engine warranty.  The Briggs & Stratton 
Engine Service Hot-Line is 1-800-233-3723.  The Tecumseh 
Engine Service Hot-Line is 1-800-558-5402. 

 
2) Commercial Use 

The warranty period for any product used for commercial or rental 
is limited to ninety (90) days from the date of original purchase. 

 
3) Limitations 

This warranty applies only to products which have been properly 
assembled, adjusted, and operated in accordance with the 
instructions contained within this manual.  This warranty does not 
apply to any product of Swisher Mower Co., Inc., that has been 
subject to alteration, misuse, abuse, improper assembly or 
installation, shipping damage, or to normal wear of the product. 

 
4) Exclusions 

Excluded from this warranty are normal wear, normal adjustments, 
and normal maintenance. 

 
In the event you have a claim under this warranty, you must return the product to an authorized 
service dealer.  All transportation charges, damage, or loss incurred during transportation of parts 
submitted for replacement or repair under this warranty shall be borne by the purchaser.  Should 
you have any questions concerning this warranty, please contact us toll-free at 1-800-222-8183.  
The  model  number,  serial  number,  date  of  purchase,  and  the  name  of  the  authorized  Swisher 
dealer  from  whom  you  purchased  the  mower  will  be  needed  before  any  warranty  claim  can  be 
processed. 
 
THIS  WARRANTY  DOES  NOT  APPLY  TO  ANY  INCIDENTAL  OR  CONSEQUENTIAL 
DAMAGES  AND  ANY  IMPLIED  WARRANTIES  ARE  LIMITED  TO  THE  SAME  TIME 
PERIODS  STATED  HEREIN  FOR  ALL  EXPRESSED  WARRANTIES.    Some  states  do  not 
allow  the  limitation  of  consequential  damages  or  limitations  on  how  long  an  implied  warranty 
may last, so the above limitations or exclusions may not apply to you.  This warranty gives you 
specific  legal  rights  and  you  may  have  other  rights,  which  vary  from  state-to-state.  This  is  a 
limited warranty as defined by the Magnuson-Moss Act of 1975. 
 

Summary of Contents for THE PREDATOR WB824















Reviews: