Swisher Response Commercial Pro ZTR2766CP, Owner'S Manual, Page: 21 / 40

SERVICE & ADJUSTMENTS
Seat Adjustment
The Swisher ZTR2766CP is equipped with a 4” range sliding seat.
Release the tension on the seat adjustment lever by pushing the grey tip lever to the left.
SEE FEATURES section in this manual.
Using your own weight, slide the seat to the desired position.
Release the lever and be certain you feel the seat slide lock into place.
PTO Clutch Adjustment
Please visit www.ogura-clutch.com/files/pdfIMP/PTOinstallation.pdf to view maintenance,
adjustment and installation instructions.
Hydro Expansion Tank Oil Levels
The Swisher ZTR2766CP is equipped with two hydrostatic transmission expansion tanks to
allow for oil expansion during regular use. These are located directly behind the seat and in
front of the engine.
Oil levels in both expansion tanks (when oil is cold or at ambient temperature) should always
be kept at the “full cold” line. Note: Oil levels could rise above this line once the oil has been
used and has increased in temperature. Wait until oil has cooled back to the ambient
temperature before checking the oil levels. See image below for reference.
If oil level in either tank is below the “full cold” line please remove the cap and add *oil to the
tank until it reaches the “full cold” line.
*Only use SAE 20w-50 engine oil; preferably with the following specifications:
•Viscosity Rating: 162 @ 40°C / 18.1 @100°C
•13cSt & 9cSt min @ 110°C
•API Classification: SL
Using another type of oil may void the warranty.
21
21
Full Cold Line
Above
Below
Cap
Expansion Tank