Swisher QuadBoss QBRC11544, Owner'S Manual

Page: 17 / 21

17
CONSOLE ASSEMBLY
FIGURE 10
Item # Description Part #
1 T Handle for Console 4463*
2 1/4-20 Nyloc Nut NB180
3 5/16-18 Nyloc Nut NB181
4 5/16-18 X 1 1/2 Bolt NB505
5 Console Weldment 4575*
6 Key Switch Lock Washer 9088
7 Key Switch Nut 9087
8 Keys KSK
9 Key Switch 3623
10 Console Mount Plate 4852*
When mounting the console assembly it may be necessary to mount it directly to the hitch tube
depending on the vehicle you are towing it with. Some vehicle configurations will allow the
console to be mounted to the vehicle (i.e. ATV rack). Place the console weldment (4575*) on
top of the hitch tube and assemble the console mount plate (4852*) from underneath the hitch
tube using the hardware provided. Make sure the wiring harness is secure and will not drag the
ground. Periodically check to make sure all hardware is tight and the wiring harness is secure.
NEVER operate this machine without the wiring harness being secure.
Item # Description Part #
11 1/4 SAE Washer NB274
12 1/4-20 X 2 1/2 HCC GR2 ZP NB163
13 1/4-20 X 1 1/4 HCC GR5 ZP NB560
14 Link for Console 4461*
15 5/64 X 3/4 Cotter Pin NB519
16 Clutch Cable Clevis 9023MOD
17 1/4 X 1 1/2 Clevis Pin NB518
18 Engage Cable 18817
19 Wiring Harness, 11.5HP Engine 19193
20 1/4-20 Wing Nut ZP NB608
When ordering replacement parts
* = USE PAINT CODE: TK=BLACK