background image

8

WARNING:

  

DISCONNECT THE SPARK PLUG BEFORE PERFORMING ANY MAINTENANCE.

 

Consult the operating and maintenance instructions of the engine manufacturer for engine care. 
 
Always check the oil level of the hydraulic reservoir before operation.  Operating without an adequate oil 
supply will cause severe damage to the pump. 
Change the hydraulic fluid in the reservoir after every 100 hours of 
operation.  
 
Periodically check that all nuts, bolts, screws, clamps and fittings are tight and secure. 
 
To keep your splitter in top working condition perform all recommended maintenance procedures before you use 
your splitter. 
 
Completely drain the fuel tank prior to storage. Always store gasoline in an approved, tightly sealed container.  Store 
container in a dry, cool place with adequate ventilation.  Keep fuel away from areas where fumes could contact open 
flame, pilot light or sparks. 
 
Be aware of the environment when disposing of used petroleum products.  Please dispose of used hydraulic 
fluid, engine oil and any byproducts from the maintenance of your splitter at approved recycling centers. 
 
Should it become necessary to disassemble the unit for repair or replacement of parts, refer to the drawings and parts 
list on the following pages.  Exercise extreme caution, as some parts are very heavy and will require sufficient 
persons or mechanical handling equipment. 
 
Your Swisher Log Splitter has been produced with components designed specifically to this machine.  Although 
standard springs, hardware, etc. may look similar to parts used on other machinery, they may in some cases be 
made of a different construction and/or materials.  All replacement parts must meet manufacturer’s 
specifications. 

 

The operation of any splitter can produce foreign objects to be thrown into the 
eyes, resulting in severe eye damage.  Always wear certified safety glasses or 
wide-vision safety goggles over spectacles before staring any splitting machine 
and while operating such a machine.

The operation of any splitter produces sound waves that are damaging to the 
human ear.  Ear protection is recommended.

MAINTENANCE & STORAGE

Summary of Contents for L114-160001





















Reviews: