18
Section 4
Setting up the TWIN RS and test-flying
pilot is able to choose the appropriate
degree of stiffness by simply taking out or
inserting the various parts.
Fig. 4:
Removing the stiffening from the Swing
Multigrip brake handle and replacing it
Multigrip brake handle on delivery with both
stiffeners
To remove the stiffeners, turn the Multigrip brake
handle inside out and push the two small rods out
through the opening
Multigrip brake handle after removing both
stiffening rods. These are the various parts:
Firm stiffening (bar)
Soft stiffening (tube)
Multigrip brake handle without stiffening
Brake swivel
Main brake line
The procedure is the same to insert the
stiffeners: turn the Multigrip brake handle
inside out and push the stiffening bar/tube
into the handle again through the opening.
There is also a swivel
where the brake
lines/brake handles connect to prevent the
brake lines from twisting
.
