background image

59

Swing-N-Slide® MANUFACTURERS LIMITED WARRANTY

Swing-N-Slide®

 takes great pride in the quality and durability of our products. Our Manufacturer’s Limited Warranty 

SURYLGHVFRQ¿GHQFHDQGGHPRQVWUDWHVRXUFRPPLWPHQWWR

providing quality residential playground products.

MANUFACTURER’S LIFETIME LIMITED WARRANTY

Swing-N-Slide®

 warrants its thermoformed slides and climbing mountains to be free from defects in workmanship and materials, under 

normal use and conditions, for the lifetime of the product.

MANUFACTURER’S 5 YEAR LIMITED WARRANTY

Swing-N-Slide® 

warrants its Custom Ready-to-Build Play Set kits and accessories to be free from defects in workmanship and materials, 

under normal use and conditions, or a period of 5 years.

MANUFACTURER’S 5 YEAR LIMITED WARRANTY

Swing-N-Slide®

 warrants its No-Cut and Wood Complete Ready-to-Assemble Play Set kits against wood rot and termite damage, and to 

be free from defects in workmanship and materials, under normal use and conditions, for a period of 5 years for structural wood components.

Cosmetic defects

 that do not affect the structural integrity of the product, or natural defects of wood such as warping, splitting, checking, 

twisting, shrinkage, swelling or any other physical properties of wood that do not present a safety hazard, are not covered by this warranty.

MANUFACTURER’S ONE YEAR WARRANTY

Swing-N-Slide® 

warrants its canopy roofs and/or tarps, playhouses and Timber GLOVE lumber wrap to be free from defects in workman-

ship and materials, under normal use and conditions, for a period of one year.

Swing-N-Slide®

 will repair, or at its discretion, replace any part within the stated warranty period which is defective in workmanship or 

PDWHULDOV7KLVGHFLVLRQLVVXEMHFWWRYHUL¿FDWLRQRIWKHGHIHFWXSRQGHOLYHU\RIWKHGHIHFWLYHSDUWWR6ZLQJ16OLGHŠDW%DUEHUU\'ULYH
-DQHVYLOOH:LVFRQVLQ$Q\SDUWVUHWXUQHGWR6ZLQJ16OLGHŠPXVWKDYHSULRUDSSURYHG5HWXUQ$XWKRUL]DWLRQ1XPEHUDQGSURRIRISXU

-

chase, including the date of purchase. This warranty is valid only if the product is used for the purpose for which it was designed and installed 
at a residential, single family dwelling. This warranty is void if the product is put to commercial or institutional use. This warranty does not cover 

DSURGXFWVZKLFKKDYHEHHQGDPDJHGE\DFWVRI1DWXUHQHJOLJHQFHPLVXVHRUDFFLGHQWRUZKLFKKDYHEHHQPRGL¿HGRUUHSDLUHGE\

unauthorized persons; (b) the cost of labor; or the cost of shipping the product, any part, or any replacement product or part.

Swing-N-Slide®

 DISCLAIMS ALL OTHER REPRESENTATIONS AND WARRANTIES OF ANY KIND, EXPRESS, IMPLIED, STATUTORY 

OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

6ZLQJ16OLGHŠ:,//127%(/,$%/()25$1<,1&,'(17$/25&216(48(17,$/'$0$*(67KLVZDUUDQW\LVQRQWUDQVIHUDEOHDQG

does not extend to the owners of the product subsequent to the original purchaser. Some states do not allow limitations on implied warranties 
or exclusion of incidental or consequential damages, so these restrictions may not be applicable to you. This warranty gives you

VSHFL¿FOHJDOULJKWV<RXPD\DOVRKDYHRWKHUULJKWVZKLFKYDU\IURPVWDWHWRVWDWH

This warranty also does not apply to:

‡

Structures not erected, maintained or inspected in conformance with

 Swing-N-Slide® 

installation plans

‡

 Structures that have had parts added or substituted not in conformance with

 Swing-N-Slide® installation plans

‡

3DUWVWKDWKDYHEHHQPRGL¿HGDOWHUHGRUPLVXVHG

‡

Parts that have not been used as designed or intended

‡

Damage due to acts of Nature, vandalism, abnormal use or abuse as determined by

 Swing-N-Slide®

WARRANTY REGISTRATION

Please complete your warranty registration to properly validate your warranty. 
Register your product online at: www.OnlineWarranty.net

Summary of Contents for WS 8357





























































Reviews: