background image

MANUFACTURER’S LIFETIME LIMITED WARRANTY

Swing-N-Slide®

 warrants its thermoformed slides and climbing mountains to be free from defects in workmanship and materials, under 

normal use and conditions, for the lifetime of the product.

MANUFACTURER’S 5 YEAR LIMITED WARRANTY

Swing-N-Slide® 

warrants its Custom Ready-to-Build Play Set kits and accessories to be free from defects in workmanship and materials, 

under normal use and conditions, or a period of 5 years.

MANUFACTURER’S 5 YEAR LIMITED WARRANTY

Swing-N-Slide®

 warrants its No-Cut and Wood Complete Ready-to-Assemble Play Set kits against wood rot and termite damage, and to 

be free from defects in workmanship and materials, under normal use and conditions, for a period of 5 years for structural wood components.

Cosmetic defects

 that do not affect the structural integrity of the product, or natural defects of wood such as warping, splitting, checking, 

twisting, shrinkage, swelling or any other physical properties of wood that do not present a safety hazard, are not covered by this warranty.

MANUFACTURER’S ACCESSORY, PLAYHOUSE WARRANTY

Swing-N-Slide® warrants its playset accessories and accessories sold separately as follows: Rope, Canopy/Tarps, Playhouses – 1 year.  

Plastic Components, Chains, Hardware and Fasteners – 5 years. These items to be free from defects in workmanship and materials, under 

normal use and conditions, for the period specified.

Swing-N-Slide®

 will repair, or at its discretion, replace any part within the stated warranty period which is defective in workmanship or 

materials. This decision is subject to verification of the defect upon delivery of the defective part to Swing-N-Slide® at 166 Etowah Industrial 

Ct. • Canton, GA 30114. Any part(s) returned to Swing-NSlide® must have prior approved Return Authorization Number and proof of purchase, 

including the date of purchase. This warranty is valid only if the product is used for the purpose for which it was designed and installed at a 

residential, single family dwelling. This warranty is void if the product is put to commercial or institutional use. This warranty does not cover (a) 

products which have been damaged by acts of Nature, negligence, misuse, or accident, or which have been modified or repaired by

unauthorized persons; (b) the cost of labor; or the cost of shipping the product, any part, or any replacement product or part.

Swing-N-Slide®

 DISCLAIMS ALL OTHER REPRESENTATIONS AND WARRANTIES OF ANY KIND, EXPRESS, IMPLIED, STATUTORY 

OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

Swing-N-Slide® WILL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty is non-transferable and 

does not extend to the owners of the product subsequent to the original purchaser. Some states do not allow limitations on implied warranties 

or exclusion of incidental or consequential damages, so these restrictions may not be applicable to you. This warranty gives you

specific legal rights. You may also have other rights, which vary from state to state.

This warranty also does not apply to:

 

• 

Structures not erected, maintained or inspected in conformance with

 Swing-N-Slide® 

installation plans

 

 Structures that have had parts added or substituted not in conformance with

 Swing-N-Slide® installation plans

 

• 

Parts that have been modified, altered or misused

 

• 

Parts that have not been used as designed or intended

 

• 

Damage due to acts of Nature, vandalism, abnormal use or abuse as determined by

 Swing-N-Slide®

Summary of Contents for WS 8343






























































Reviews: