18
Anchor-It
Anchor-It
Strap
1-1/2”
Lag Screw
5/16”
Washer
Fold up
Affix Label as shown
using (4)1/2" Screws
1 At locations circled above, twist the Anchor-It into the ground until only the loop is exposed.
2. Place Anchor-It Strap thru loop, fold the ends together and attach to the unit as shown.
Note: Keep as little play as possible using any of the holes in the strap that work best.
TIP:
When installing Anchor-Its in rocky or hard soil, create a starter hole at the desired locations using either a 16’’ Concrete
Drill Bit, or a long screw driver then insert and install the Anchor-Its as shown. This will allow you to get traction with the Anchor-It
faster and allow the device to seat more securely.
3. Attach Label to pole using (4) 1/2" panhead screws.