40
Assembly Instructions
Swing Seats
NEVER hang a swing seat by a
partial link of chain! Remove and
discard partial links.
Swing Seat Assembly.
1.
Hold the swing seat vertically and insert uncoated chains through the channels on the bottom of the swing seat.
Note:
A coat
hanger may be used to help pull chain through the swing seat. One full link should show at each end of the seat
(Fig. 31)
.
2.
Place one covered chain onto each harness so that it fits at the top of the V-hanger. Insert uncoated chains to bottom vinyl hooks of
V-hanger.
(Fig. 31a)
. Crimp harness end closed.
CAUTION: It is important that you crimp harness ends completely closed before using (see Fig. 31b).
Place end
of harness with hooks on a hard surface and force hooks closed with a hammer or squeeze closed with a pliers until parts are
touching.
WARNING: Open hooks can cause deep cuts.
3.
Hang the chains from the nylon bushing swing hangers. Crimp the hook opening closed with a pliers to secure the chains to the
swing hangers
(Fig. 31c)
. Make sure all connections are tightly crimped and secure before using swing seat.
Fig. 31
Fig. 31a
Fig. 31b
Fig. 31c
Summary of Contents for PB 8274
Page 42: ...42 Assembly Instructions...
Page 43: ...43 Assembly Instructions...
