Swing-N-Slide PB 8272T Assembly Instructions Manual Download Page 2

2

Safety Checklist for Swing-N-Slide Play Sets and Accessories

IMPORTANT!

This product is intended for single family home/residential use only and not intended for use in any 

public setting. Placement in any public setting constitutes a misuse of this product.

Observing the following statements and warnings reduces the likelihood of serious or fatal injury

 

This playset has been designed for use by a maximum of fifteen (15) occupants at one time having a 

 

combined weight of 1,575 pounds. 

 

This playset is intended for use by children from (2) to (10) years of age.

 

On-site adult supervision for children of all ages is recommended.

 

Instruct children not to walk close to, in front of, behind, or between moving items.

 

Instruct children not to twist swing chains or ropes or loop them over the top support bar since this may   

      reduce the strength of the chain or rope.

 

Instruct children to avoid swinging empty seats.

 

Teach children to sit in the center of the swings with their full weight on the seats.

 

Instruct children not to use the equipment in a manner other than intended.

 

Instruct children not to get off equipment while it is in motion.

 

Do not allow children to wear inappropriate items, such as but not limited to, loose fitting clothing, hood 

 

and neck drawstrings, scarves, cord-connected items, capes and ponchos. These items can cause 

 

death by strangulation.

 

Instruct children not to climb when the equipment is wet. Slippery surfaces may cause a hazard.

 

Verify that suspended climbing ropes, chain, or cable are secured at both ends.

 

Verify that suspended climbing ropes, chain, or cable cannot be looped back on itself.

 

Instruct children not to attach items to the playground equipment that are not specifically designed for    

      use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and  

 

      chain as they may cause a strangulation hazard.

 

Instruct children to remove their bike or other sports helmet before playing on the playground equipment.

 

Dress children with well-fitting and full foot enclosing footwear. Examples of inappropriate footwear are 

 

clogs, flip flops, and sandals.

 

Never add extra length to chain or rope. The chains or ropes provided are the maximum length designed  

      for the swinging element(s).

 

Instruct children to not walk or run up slides.

 

Instruct children to not pick up slides or ramps as this may cause damage or breakage.

 

Place the equipment on level ground not less than six (6) feet from any obstructions. Be sure to look    

      overhead for any obstructions above the playset.

 

Do not use the equipment until fully erected per this playset instruction manual, bolts tightened and 

 

the playset is anchored to the ground.

Summary of Contents for PB 8272T



































































Reviews: