33
PROJECT 513
Can
tile
ver
be
am
T-nut
2-1/2'' screws
5-1/2ʼʼ Hex Bolt
Washer
S. A-Frame Assembly cont.
1. 1.
Tap T-nut into 3/8’’ hole as shown in
(Fig. 22)
Note:
If using Laminated Swing Beam, make sure T-nut teeth do not fall between seams of 2'' x 6''s.
2.
Attach A-Frame beam to Swing Beam using (2) 5-1/2’’ hex bolts and 4 screws.
3.
Tighten hex bolt to flush with top of T-nut. Repeat on other bracket.
Fig. 22
2-1/2'' screw
Summary of Contents for Kodiak PROJECT 513
Page 47: ...47 PROJECT 513...
