9
8
Part 1
Studio installation
FEET ON THE FLOOR
Part 1
Studio installation
3
CONNECT THE 3D MOTION PLATE
Connect one of the provided USB cables to the side of the
pressure plate.
Connect the second USB cable underneath the force
plate.
Connect both cables to your PC. Please use the
provided extension cables if necessary.
1
2
1
2
All electronics connected to the 3D Motion Plate must have
ground. The power grid should have adequate grounding.
We recommend using surge protectors to prevent damage
to your electronics.
Important!
To ensure accurate data readings the 3D Motion
Plate must be level and have all 4 feet in contact with the floor.
Make sure the plate is level before mounting the Balance Plate.
It’s important to account for the height of the Balance Plate when
adjusting the Force Plate to make the install flush with the turf.
