21
Never apply chemicals directly to the skimmer. Rath
-
er, they must be dissolved in a bucket of water before
spreading them along the edge of the pool. Alternative
-
ly, you can use child-safe liquid chlori-de dispensers.
Technical Data
•
Flow rate 1.7 m3/h
•
Motor 2 W
•
Voltage 12V
•
Transformer 230/12V
•
IP class I IPX8
Electrical Components
The filter system is a low-voltage type and is guarded against
water penetration. If the cord or other component is damaged,
the entire filter pump must be replaced in order for the system to
be safe to use.
Removing the Skimmer Filter
If damage has occurred to the filter system, proceed as follows:
•
Disconnect the filter system from the power source
•
Remove the filter system from the pool
•
Remove the filter pump from the system
Winterization
The filter system must be removed and kept frost-free during the winter. Likewise, the filter system
must be removed when it is not to be used for a protracted period. When removing the filter, it must
be cleaned before it dries out. When winter is over, the system is placed into the pool once more as
described when first put to use.
Safety Directives
•
There must be a minimum distance of 3.5 meters between the transformer and the pool
•
Electrical installations must be performed by a qualifi ed electrician
•
The fi lter system must be turned off when the pool is being used
•
The fi lter system must NEVER be run without water
•
Do not touch the system with wet hands while it is running
•
f the fi lter must be handled, the power source must always be disconnected fi rst
•
If the fi lter must be handled, it must always be done on a dry surface
•
Never store the fi lter in a moist location; it can cause an electric shock
•
Children and adults alike must never sit on or lean against the fi lter
•
If the cord is damaged, the entire system must be replaced
•
Any questions may be directed to your pool retailer of to
0
