background image

6

3.3  Crane Deliveries 

3.4  Fork Lift Deliveries 

3.5  Roller Deliveries 

3.1  Retailer Delivery

3  Delivery and Handling 

    Considerations 

3.1  Retailer Delivery

All SwimLife Swimspas are shipped with a layer of protective 

foam wrap, plastic film and cardboard for added protection. 

Each Swimspa is shipped from the factory strapped onto a 

wood skid. If your Swimspa is to be delivered by your local 

SwimLife retailer, it will generally arrive on a flat bed truck 

or low profile trailer. Typically, the dealer will arrive with the 

necessary equipment to maneuver the Swimspa from the 

truck.  The Swimspa can then be lifted by a crane into place. 

3.2  Direct Deliveries 

Like the retailer delivery, your Swimspa will come wrapped 

and skidded the exact same way, however, your Swimspa 

may arrive on a 48 ft. or 53 ft. common carrier closed box trailer. 

You can arrange the exchange at a local cross docking facility 

to a flatbed truck. The Swimspa can then be lifted by a crane  

into place. 

3.3  Crane Deliveries 

Most installations require the use of a crane. When a crane is 

used for lifting, place the straps under the Swimspa, ensuring 

that the plumbing lines and fittings are not stressed and / or 

damaged and a spreader is used. The straps should be secured so 

that they will not slip in any direction and strap spreaders utilized  

to prevent undue structural side load on the Swimspa shell.

3.4  Fork Lift Deliveries 

If you are removing the Swimspa using a forklift, please make 

sure to use 8 – 10’ / 2.5-3 m extended forks and pick up swim  

spa at the equipment end.

3.5  Roller Deliveries

Although it is recommended to install your Swimspa by crane, 

it may be pushed along rollers by 10 to 12 able-bodied adults 

(see image).

If rollers are to be utilized, we recommend that at least 

six 4”/ 10 cm diameter pipes, 8’ / 2.5 m long, be placed under 

the shell to move it across a soft lawn, down a path, etc. 

3.6   Warnings! 

•   

Do not move or place the Swimspa on its side

•   

Never lift or handle the Swimspa by its plumbing

•   the 

Swimspas dry weight is in excess of 2302 lbs. / 1044 kgs.  

•   

Please ensure lifting equipment is sufficent for the job.  

      Manually lifting of the Swimspa should be done with the  

      proper manpower.

•   

We strongly recommend the installation to be done by a  

      SwimLife Retailer.

Summary of Contents for SwimExpert AQUASTREAM

























Reviews: