Copyright Swiftech 2014
– All rights reserved – Last revision date: 7-18-14 - Rouchon Industries, Inc., dba Swiftech® –151 West Victoria Street, Long Beach, CA 90805 – Tel.
310-763-0336 - Toll free (US) 888-857-9438
– Fax 310-763-7095 - E Mail: [email protected] – URL: http://www.swiftech.com - Information subject to change without notice
Always make sure that you have sufficient slack in the tubing coming from your loop so that you can pull the
Maelstrom and access the fill-port from the front in order to fill it up with coolant.
3. LED installation
Apply a small drop of cyanoacrylate type of glue (Loctite, Superglue, Krazy glue) (not provided) to the LED body, and
immediately insert it in one of the desired holes. We recommend testing the illumination (with coolant) of your
preferred location prior to gluing the LED.
4. Pump Electrical connections
5. Coolant: precautions for use
The recommended coolant is Swiftech's HydrX or Hydrx PM. Swiftech's
does not cover the use of 3rd-
party coolants.
Excessive use of coloring additives and/or UV dies containing particulate fillers may damage your pump bearing and may void
your pump warranty.
The use of any additive or coolant containing alcohol is prohibited and dangerous: it will result in permanent damage to your
acetal reservoir and may result in catastrophic leaks.
