10
10
11) Put Printhead Unit on the rail guide, and then insert it into Printer
until it stops.
NOTE:
Skewering Shaft must be on Printhead Guide Rails.
CAUTION:
• To confirm Printhead Unit is in the correct position, see if the end of Printhead Unit
grip and the edge of the inner metal plate are in the same plane as shown in the
figure.
• If Printhead Unit is insufficiently inserted, Lower Printhead Release Lever cannot
be closed.
F-1-23
F-1-22
12) Mount Blade Cleaner.
13) Close Lower Printhead Release Lever and Upper Printhead Release Lever.
F-1-24
F-1-25