2. Switch the motor off.
3. Wait until the cutter bar stops.
4. Lift the discharge flap.
5. Remove the grass catcher.
6. Lower the discharge flap down again.
7. Empty the grass catcher.
8. Before hooking, remove any obstructions from the
cutting area.
Working Without the Grass Catcher
When working without the grass catcher, the mowed
grass is ejected directly downwards.
Charging the Battery
1. Plug the charger into an AC outlet 100-250V (normal
household voltage).
2. Insert the battery into the slots of the charger and slide
into place until the battery locks into place
3. The LED will flash green while the battery is charging.
- Once the battery is fully charged, the LED indicator will
show a steady green light.
- Remove the battery by pressing and holding the latch
button and sliding out of the charger.
Lithium Ion batteries
have no memory effect – a partial charge will not damage
your battery.
TIPS ON LAWN CARE
Here are some tips to help you keep your lawn looking
healthy and ensure uniform growth:
Lawns consist of various grass types. Frequent mowing
promotes the growth of grass, resulting in strong roots and a
firm sward. If you seldom cut the grass, you will enhance the
development of high-growing types of grass and other weeds,
such as clover, daisies). The normal height of a lawn is
approx. 4–5 cm. Only one third of the total height should be
mown; therefore cut 7–8 cm long grass to normal height.
PARTS LIST
1. Upper Handle
2. Fasten Screw
3. Lower Handle
4. Grass Catcher
5. Battery
6. Wheels
7. Switch Interlock
8. Foam Pipe
9. On/Off Switch
10. Plastic Stopper
11. Safety Key
