ELECTRICS
71
ELECTRICS
71
3.12 Air-conditioning
If your vehicle has been fitted with a
compatible air-conditioning unit then the
settings can be set / controlled by the EC620
control panel or the Swift Command app.
Scroll to the Aircon Settings and press select
to set or adjust the related settings.
Aircon features are currently being finalised, so
further information will appear here in version
2.3 of this document.
3.13 Other Controls
The main control panel will display the software
version number of both the Control Panel and
the PSU. On the EC620 menu item press the
select button to display software information.
3.14 AL-KO ATC Operation
On caravans fitted with AL-KO Automatic
Traction Control, the Swift Command App can
be used to monitor the status of the ATC from
within your tow vehicle. More information on
this can be found within the Swift Command
App and the associated user guide.
3.15 Temperature Readings
The EC600 Temperature sensor measures the
‘core’ temperature of the vehicle, and provides
a figure for information only. The same sensor
also measures humidity, providing a figure (also
for information only) from within that bed box
or storage area.
It is hoped that the temperature information is
a particularly useful figure, for instance when
checking on the vehicle remotely during cold
weather.
For vehicles fitted with Alde or Truma heating
systems, this sensor is not used to control the
heating temperature as it is measured above
the door by the Alde or Truma room sensor.
The readings on the heating system may vary
relative to the storage area temperature below
the bed.
For vehicles fitted with a Whale heating
system, the sensor is used to control the
heating temperature as this system does not
have its own sensor.
Heat from other items in the vehicle (in
particular components from the heating
system itself) will have a bearing on the reading
displayed by the Swift Command system.
Ventilation is also present in the majority of bed
/ storage areas, and air entering or passing
through this area will also have an effect on the
temperatures and humidity levels displayed.
3.16 Bluetooth Pairing
Using the control panel, access the System
Settings menu and then scroll to the Bluetooth
pairing section. Press the select button to
start pairing, the power button LED will flash
to indicate the pairing mode. You can now
pair your device to the system following the
devices instructions to add a Bluetooth item.
Pairing remains on for 1 minute and is then
turned off automatically.
Note: Further help with Bluetooth pairing is
available in the form of a help video which
can be viewed on the Sargent website in the
Support Information section.
SWIFT COMMAND POWER CONTROL SYSTEM
Summary of Contents for Basecamp 2018
