Swift Group 2013 Holiday Home, Owner'S Manual

Page: 50 / 108

46
General Care
To adjust the door vent
compression and height within
the frame unclip the cap as
shown.
This bolt is used to adjust height and
compression.
Insert 4mm A/F Alan key to adjust the vent height
within the frame and the vent to frame
compression.
As the Alan key is turned clockwise clicks are felt
and the vent will rise. When the correct height has
been reached the compression should be adjusted
left or right clicks. The compression gap should
be set at 3mm. To lower the vent turn anti
clockwise and repeat the steps.