SWEISS
WELD.COM
NOTES
18
Setting range 0—10
Factory setting 0
Ic Crater arc current (only with 4T)
Unit S
Setting range 5—100% of main current Iw (DC) 10—100% of main current Iw (AC-HF)
30—100% of main current Iw (AC-LIFT)
Factory setting 5
Tpo Gas post-flow time
Unit S
Setting range 0.1—10
Factory setting 3
AC frequency (only with TIG-AC)
Unit Hz
Setting range 50—250 (Iw<50A)
50—200 (50A≤Iw<100A)
50—150 (100A≤Iw<150A)
50—100 (150A≤Iw<200A)
Balance (only with TIG-AC)
Balance adjustment is mainly used to set the adjustment of eliminating metal-oxide (such as
Aluminium, Magnesium and its alloy) while AC output.
Unit %
Setting range 15—50
Factory setting 15
(9) Rod electrode(MMA) welding key
Parameter Setting range
Arc force
0-10
Hot start
0-10
Arc length
0-10
(10) Power/Alarm indicator
Light up if the power switch on
Light up if the welder overheat,
display Err 001.
(11) Welding voltage/other parameter display
-voltage or over-current.
over
At the same time,
