SWEISS
WELD.COM
8
§4 Operation
4.1 Layout Of The Front And Rear Panel
OFF
ON
Fig 4.1 schematic drawing of the front panel and rear panel
1.
Power pilot lamp
2.
Over-current, over-heat alarm
when over-heat, over-current, the lamp would be on.
3.
Cutting gun improper installation and air pressure low alarm
4.
Work lamp
turn on the switch of the cutting gun, generate the voltage, the lamp on
5.
Cutting current regulator; it
is used to regulate the current when cutting.
6.
Normal Cut
Grid Cut
