SWEISS
WELD.COM
10
3.4 TIG
When there is TIG operation, the shielding
gas is connected to the torch directly and
the Lift method is used.
Start of TIG arc: when the tungsten electrode touches the work piece, the circuit current is only 10A.
After generating the arc, the welding current rises to the preset value. If the tungsten touches the
workpiece while welding, the current drops to 10A in 2 seconds, reducing electrode deterioration and
prolonging the life of the tungsten.
2. Scrape the tusgteno
against the part to be
welded
3. separate 2 to 4mm
to start the arc
1. Place torch in
position
Summary of Contents for SKY ARC Series
Page 1: ...MANUAL DE USUARIO SKY 2040 Nx MAX SWA2040N ...
Page 45: ...USER MANUAL SKY 2040 Nx MAX SWA2040N ...
Page 89: ......