JA Wettergrens gata 7
SE-421 30 Västra Frölunda, Sweden
Swegon reserves the right to alter specifications.
Connection to hand-held terminal TuneWISE
To connect the scanner to TuneWISE you first need to make some
settings on the scanner.
The settings are made by scanning the adjacent seven codes in order.
(Depending on which code is to be scanned different beeps are
heard).
Wait about 5 seconds between each code
When the settings in the scanner have been completed, start Tune-
WISE and go to the “Scanner” menu under the “Settings menu”.
• When the scanner appears in the list to the left: First select the
scanner and then “Connect”.
• A beep is heard and the scanner symbol appears on the header in
TuneWISE.
• All done!
If it is not possible to connect the scanner to TuneWISE after this,
repeat the procedure from the beginning.
Bar codes and QR codes used when initiating the Scanner TuneWISE
1.
2.
3.
4.
5.
6.
7.
Scanner Tune
WISE
a-KIT
Instructions for Use
English
25/10/2017