In additional, necessarily must use the EMC filter, type
ZCAT1518-0730 on the cable, as shown in the figure
below. The EMC filter should be included with the con-
troller. The filter should be inserted on the cable, necessa-
rily in the form of a cable loop between the control panel
and the controller module at distance about 120 mm from
the control panel connector.
Installation EMC filter: 1 - control panel, 2 - controller
module, 3 - EMC filter (type ZCAT1518-073).
In addition, EL2adapter_v2 adapter can be used to
extension the control panel connection to the controller
module. The adapter provides a wire connection with an
RJ-type plug with a 4-wire cable and is available from the
control panel manufacturer.
Cleaning and maintenance procedures
The outer surface and maintenance of the control panel
screen.
The device should be cleaned with a soft, dry
cloth.
It is not allowed to clean the device with a flam-
mable agent or substance (i.e. benzene or any
kind of solvents) or a wet cloth. Such treatment
can lead to malfunction of the device.
It is not allowed to scratch the screen with nails
or other sharp objects. It can lead to scratches or
damage of the device.
It is not allowed to clean the device by spraying
water on it. If the water gets inside of the device
it can cause a fire or lead to electrocution or
damage the device.
8
Swegon reserves the right to alter specifications.
