Swegon reserves the right to alter specifications.
20130610
www.swegon.com
WISE
2
Figure 3. Lighting fixtures or similar objects must not be installed
beneath the diffuser as this disrupts the presence detection and
room temperature measurement.
Maintenance
The exterior surface of the ADAPT air diffusers can be
cleaned whenever necessary using lukewarm water with
dishwashing detergent added.
The duct system is accessible through the air diffuser and
the commissioning box.
Commissioning
All the ADAPT Air diffusers are delivered preset into com-
missioning mode, which means that the air diffuser is set to
max. airflow by force control.
When the ADAPT air diffuser is in commissioning mode,
the light-emitting diode shines orange. The different LED
indications:
•
Steady green LED: Normal operation, the air diffuser is
operating normally.
•
Flashing green LED: The air diffuser has just been
powered on and calibration is in progress.
•
Steady red LED: Function failure, see separate docu-
mentation in the TUNE Adapt manual.
•
Steady orange LED: The commissioning mode, max.
airflow
•
Flashing orange LED: Other commissioning modes and
all the forced control situations of the feedback control
system.
More information about the commissioning process itself
can be read in the Project Manual for the Wise system and
in the TUNE Adapt manual.
