English version
12
2. Connect the audio sources (Including DVD, VCDR, CAMCORDER and PC) to the proper AUDIO input jacks ‘L’ and ‘R’.
3. Connect the video source to the VIDEO jack by RCA cable.
4. If the video source has a SCART output jack, you can connect the signal to the monitor by the SCART cable.
5. Connect the video source to the S-VIDEO input jack of the monitor by the S-video cable (Pretending that the video source has S-video output jack).
6. Insert the AC power to the DC adapter, then connect it’s DC output jack to the12V input jack of the monitor.
7. When using the LCD as a computer screen, connect the PC to the VGA jack from the monitor by the relevant cable.
IV.
TV/Monitor screen operation
(1) Basic
operation
1.
Press
the
POWER button on the unit or the STANDBY button on the remote control to switch on the power, the indication light will be in blue color .
Press the POWER or STANDBY button again to switch off the power, and the light will be in red color.
2. The Picture setup, Sound setup, Previous channel can be memorized before you switch off the TV/Monitor. The TV/Monitor will re-start under the previous
state when you switch on it again.
3. Press the VOL - or VOL + button to adjust the volume output. Press the VOL - button repeatedly to decrease the volume; press the VOL + button repeatedly
to increase the volume from 0 to 100.
(2) View the TV plays.
1. Press the INPUT button on the remote control to select the TV function mode. Channel ‘1’ will appear on the top left hand corner after channel searching
is completed . Press the CH- or CH+ button to select the previous or next channels; or press the 0-9 buttons to enter a channel number directly, or press
the -/-- button until the screen display ‘-’ or ‘--’, then use the 0-9 numerical buttons to enter a channel number from 1 to 199.
2.
Press
the
button on the remote control to select from the present channel and the previous channel.
3. Press the PMODE button repeatedly to cycle through the available video picture modes from the below 4 types
4. Press the SMODE button to repeatedly to cycle through the available sound modes from the below 4 types
5. Press the MUTE button to cut off the sound output, press this button again to resume sound output.
6. Press the DISPLAY button to display the preset channel information
STANDARD
MILD
FRESH
PERSONAL
MUSIC
THEATRE
PERSONAL
VOICE