English version
10
The network called “Sweex” is an unsecured network. You do not need a security code to connect your computer to this network. The “USBLASTER”
network is secured. You do need a security code to connect your computer to this network.
If no list appears, but you are told no wireless networks can be detected, check whether the wireless router, modem or access point is switched on
and whether the distance to the wireless computer is not too big.
If you receive a notification saying the wireless connection cannot be configured because it is managed by another programme, disable that software
and go back to the previous step to start again.
In order to connect to one of the networks detected, select it and then click “Connect”.
This notification appears when you are connecting to an unsecured network. Click “Connect Anyway”.
This window appears when you are connecting to a secured network. You are prompted for the security code, also referred to as network key.
Enter the network key in both lines and click “Connect”.
If the connection to the wireless network has been successful, the notification “Connected” appears after a couple of seconds. You now have an
active wireless network.
If the network key you have entered is incorrect, a notification saying "Limited or no network connection" appears after a couple of seconds. Your
wireless connection is not satisfactory. Check the network key. Check the wireless router, modem or access point which should provide the computer
with an IP address. This is a unique number required for each computer that is part of a network. In most cases, the computer is automatically given
an IP address. Also check the computer settings.
