English version
W W W . S W E E X . C O M
4
Warning!
To conserve the battery power and extend battery usage time, hold the "ID Reset" button for 3 seconds until the optical sensor flashes. The
mouse is set to "Sleeping Mode". Press the "ID Reset" button again to reactivate the mouse.
Hardware installation
1. Shut down your computer system.
2. Connect the green connector of the receiver to the PS/2 connection port of the computer, or connect the purple connector of the receiver to
the PS/2 connection port.
3. Turn on your computer system.
Software installation (driver)
1. Insert the CD/Driver into the CD-ROM player.
2. The computer will enter the setup screen.
3. Select "Keyboard".
4. Click the "Office Keyboard" option under "Ke Mouse 2 in 1".
5. Click on the appropriate item for setup.
6. Follow the setups indicated in the screen to complete the keyboard setup.
7. Restart your computer system.
8. Run the "AutoRun.exe" of the CD/Driver.
9. The computer will enter the setup screen.
10. Select " Keyboard ".
11. Click the "Mouse" option under " Ke Mouse 2 in 1".
12. Select "3D 3Buttons".
13. Click on the appropriate item for setup.
14. Follow the setups indicated in the screen to complete the keyboard setup.
15. Restart your computer system.
