Sweepster WSP24 Manual Download Page 12

12     

51-4144

oPeRaTioN - CoNTiNueD

SeRViCe & RePaiR - GeNeRal

Repair or adjust the sweeper in a safe area, away 

from traffic and other hazards.

before adjusting or servicing remove spark plug 

wire from spark plug.

SToRaGe

NoTiCe 

Do not store the sweeper with 

weight on the brush.

 weight will 

deform the bristles, destroying the 

sweeping effectiveness.

 

Do not store polypropylene 

brushes in direct sunlight.

 the 

material can deteriorate and crumble 

before the bristles are worn out.

 

Keep polypropylene brush 

material away from intense heat or 

flame.

Swing the Brush

the brush can be swung 20° to either side. Press 

the steering knuckle arm for the brush, turn the 

brush and let go of the handle, so that the catch will 

fall correctly into place. (figure 1)

figure 1

Steering Knuckle arm

find information about the engine in the Motor 

manual instruction.

WaRNiNG!  eXPoSuRe To ReSPiRaBle 

CRySTalliNe SiliCa 

DuST aloNG WiTH oTHeR 

HaZaRDouS DuSTS May 

CauSe SeRiouS oR FaTal 

ReSPiRaToRy DiSeaSe.

 

 

It is recommended to use dust 

suppression, dust collection and 

if necessary personal protective 

equipment during the operation of 

any attachment that may cause high 

levels of dust.

Worn Section Standard

Reference

Information

Section OD, 

New

Ring ID

Section

OD, Worn

Exposed

Bristle, Worn

Bristle

Length

Exposed

Bristle, New

24

6.38

17

3.8

8.50

7.5

26

8.00

18

4.0

9.00

8.0

32

10.00

22

5.0

11.00

10.0

36

10.00

24

6.0

13.00

12.0

36

10.63

25

6.0

12.69

11.4

46

19.38

34

6.0

13.31

12.1

Summary of Contents for WSP24






















Reviews: