Slide the brush release latch backwards.
Hinge up and remove the rotating brush.
Carefully use a scissors to cut off knotted
fibres and dirt from the brush.
Re-insert the rotating brush and click the
release latch to the locked position.
If the filter or sponge are very dirty, they may be washed by rinsing gently with fresh
warm water. Leave to dry thoroughly before re-inserting into the vacuum.
Warning
Never reinsert filters that are still wet !
Never operate the vacuum without all the filters in place !
Ensure the sponge filter is in place and inserted facing down.
Cleaning the rotating brush
Note - For safety please remove the battery before cleaning the rotating brush.
