Lit. No. 72356, Rev. 00
16
March 1, 2019
OPERATING INSTRUCTIONS
SWEEPING
1. Lift up the brushes by pushing down on the
handlebars. Engage the brushes.
2. Carefully lower the brushes to the ground.
3. Engage the movement drive. Just follow behind
the rotary broom.
4. Set the speed by using the throttle lever. Do not
try to hold the rotary broom back or push it.
5. When sweeping dust, use a low brush speed (low
throttle).
6. When using the debris collector box, or the debris
shield, use a medium speed (half-throttle).
IMPORTANT: The brush pressure adjusts
automatically to the ground pro
¿
le. However, you
can in
À
uence the brush pressure by either pulling
back or pushing on the handlebar. Pulling the
handlebar back decreases the pressure; pushing
will increase the pressure (for heavily soiled areas).
7. If the brush pressure is too heavy, the cleaning
effect is decreased because the brush
¿
bers are
bent too much.
