SECTION 6– (cont.)
Figure 6-5: Tap key into place. Figure 6-6: Make sure flywheel is next to lock nut.
6.2 – INSTALLING THE FLYWHEEL
Support BB000502 FLYWHEEL in place over the flywheel shaft, as shown in Figure 6-3. Insert
BN000538 QD HUB into flywheel. Tap key into place, as shown in Figure 6-5. Before tightening the QD
hub to the flywheel, make sure the flywheel is against the rear lock nut. As the QD hub gets tightened,
it will pull the flywheel away from the lock-nut into position. Tighten the QD hub using in sequence to
348 in-lbs (29 lb-ft).