Safety Instructions
Clean
When cleaning the monitor case or the surface of the TFT-LCD , wipe with a slightly
moistened, soft fabric.
Do not spray detergent directly on the monitor. Use the recommended
detergent with a smooth cloth.
If the connector between the plug and the pin is dusty or dirty, clean it
properly with a dry cloth.
A dirty connector can cause an electric shock or fire.
A dirty connector can cause an electric shock or fire.
Do not set a glass of water, chemicals or any small metal objects on the
monitor.
This may cause damage, electric shock or a fire. If a foreign substance gets into
the monitor, disconnect the plug and then contact a service center.
Other
Do not remove cover (or back), No user serviceable parts inside.
This may cause an electric shock or a fire. Refer servicing to qualified service personnel.
If your monitor does not operate normally-in particular, if there are
any unusual sounds or smells coming from it- unplug it immediately
and contact an authorized dealer or service.
This may cause an electric shock or a fire.
Do not place any heavy objects on the monitor.
This may cause an electric shock or a fire.
Let your eyes rest for 5 minutes. For each hour of looking at the monitor.
This will reduce eye fatigue.
Do not use or store inflammable substances near the monitor.
This may cause an explosion or fire.
Do not try to move the monitor by pulling on the wire or the signal cable.
This may cause a breakdown, electric shock or a fire due to damage to the cable.
Do not move the monitor by pulling the wire or the signal cable.
This may cause a breakdown, electric shock or a fire due to damage to the cable.
Never insert anything metallic into the monitor openings.
This may cause an electric shock, fire or injury.
Keep the monitor away from any magnetic substances.
This may cause discoloring or distortion of the image.
User’s Manual
5
Summary of Contents for XV1-15 Series
Page 1: ...User s Manual XV1 15 series XV1 17 series www swedx com...
Page 2: ......
