Page 8
3454.504.02
Version 1.7
4 CONTROL AND MAINTENANCE OF THE STARTING BLOCK
4.1 Control without application of pressure
Connect the buzzer (11) to the connection cable (9). If there is no pressure on the
platform, the buzzer (11) remains silent. If the buzzer (11) emits a sound, proceed as
described in paragraph 4.5.
4.2 Pressure sensitivity control
Press with the Dynamometer (12) against the middle of the platform (3). Read on the
Dynamometer (12) the pressure necessary to activate the buzzer (11). If the sensitivity is out of the
range of 13kg and 18kg, see paragraph 4.7.
4.3 Connection to the timing system
If a satisfactory result has been obtained in tests 4.1 and 4.2, connect the connection
cable (9) to the timing system.
Figure 7 - Maintenance
