Swimming Starting Block / OSB 11
Version 1.7
3454.504.02
Page 5
2 INSTALLATION
2.1 Positioning of the OSB11 starting blocks
The
OSB11
starting blocks are positioned according to the measures indicated: 400mm from the
swimming pool border (410mm with the OCP5 touchpad) to the front of the base.
The handle of the
OSB11
must be aligned with the border of the touchpad (for example OCP5).
Are the touch plates missing or is the swimming pool too small with touchpads, align the
OSB11
starting block with the border of the swimming pool.
The drilling oblong fixations permit a play of the block of +/-10mm; this permits a possible
correction of the alignment.
Figure 4 - Positioning of the OSB11
Swimming Pool as per
FINA regulations
